Light – Reflection and RefractionClass 10 Physics Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study7 marks
The Car's Rear-View Mirror
Safe driving requires a clear awareness of the traffic behind. For this purpose, vehicles are fitted with a rear-view mirror. These mirrors are specifically designed to give a wide field of view, allowing the driver to see a much larger area than a normal flat mirror would. A standard rear-view mirror on a car is a convex mirror with a label that often reads, "Objects in mirror are closer than they appear."
Consider a typical scenario: a driver sees a bus in her rear-view mirror. The bus is located 5.0 m from the mirror, and the mirror has a radius of curvature of 3.00 m. The image formed is erect and smaller than the bus, which allows the driver to see the entire bus and its surroundings, enhancing safety.
Questions on this case
1(1 mark)MCQ
Why is a convex mirror preferred as a rear-view mirror in vehicles?
2(1 mark)MCQ
What is the nature of the image formed by the convex mirror described in the passage?
3(1 mark)MCQ
What is the focal length of the mirror with a radius of curvature of 3.00 m?
4(2 marks)
Using the data from the passage (u = -5.00 m, f = +1.50 m), calculate the position of the bus's image.
5(2 marks)
Explain the meaning of the warning, "Objects in mirror are closer than they appear."
Case Study7 marks
The Student's Mirror Experiment
A group of Class 10 students was tasked with determining the focal length of a given spherical mirror. For their first step, they mounted the mirror on a stand and pointed it towards a distant tree, which acted as an object at infinity. They moved a screen back and forth in front of the mirror and found that a sharp, inverted, and tiny image of the tree was formed at a distance of 15.0 cm from the mirror's pole.
For the second part of the experiment, they replaced the distant tree with a burning candle. They placed the candle at a distance of 40.0 cm from the same mirror. They then adjusted the screen again to capture a clear image of the candle flame.
Questions on this case
1(1 mark)MCQ
Based on the first part of the experiment, what is the focal length of the spherical mirror?
2(1 mark)MCQ
The mirror used in the experiment is a:
3(1 mark)MCQ
When the candle is placed at 40.0 cm, where is it located relative to the mirror's principal focus (F) and centre of curvature (C)?
4(2 marks)
Calculate the position where the screen should be placed to get a sharp image of the candle flame.
5(2 marks)
If the candle flame is 4 cm high, what will be the height of the image formed on the screen? Is the image enlarged or diminished?
Case Study7 marks
The Jeweller's Loupe
A jeweller uses a small magnifying glass, also known as a loupe, to inspect the fine details and imperfections of a gemstone. The loupe is a single lens mounted in a frame. To get a clear and magnified view, the jeweller holds the loupe very close to the gemstone. The image seen through the loupe is upright and much larger than the gemstone itself, allowing for a detailed examination.
Let's say the jeweller is using a loupe which is a convex lens with a power of +25 D. To get the desired magnification, he positions the gemstone at a distance of 3 cm from the optical centre of the lens. The image he sees is not projected onto any surface; he views it directly through the lens.
Questions on this case
1(1 mark)MCQ
What is the focal length of the jeweller's loupe in centimetres?
2(1 mark)MCQ
To function as a magnifier, the object (gemstone) must be placed:
3(1 mark)MCQ
The nature of the image seen by the jeweller is:
4(2 marks)
Calculate the position of the image formed when the gemstone is placed 3 cm from the lens.
5(2 marks)
Why can the image seen by the jeweller not be projected onto a screen?