Kinetic TheoryClass 11 Physics Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study7 marks
The Gaseous Mixture
A research scientist is working with a sealed, rigid 50-litre steel cylinder kept at a constant temperature of 300 K. The cylinder contains a mixture of two non-reactive gases: argon (Ar), a monatomic gas, and nitrogen (N₂), a diatomic gas. A precision gauge measures the total pressure of the mixture as 4.0 atm. A partial pressure sensor, specific to argon, indicates its pressure is 1.0 atm.
The scientist knows that for any gas mixture, the total pressure is the sum of the partial pressures of the constituent gases, a principle known as Dalton's Law. She needs to understand the microscopic properties of this mixture before using it in a plasma physics experiment. The molar mass of Argon is approximately 40.0 u and that of Nitrogen (N₂) is 28.0 u.
Questions on this case
1(1 mark)MCQ
What is the ratio of the number of molecules of argon (N_Ar) to the number of molecules of nitrogen (N_N₂)?
2(1 mark)MCQ
Which statement correctly compares the average kinetic energy per molecule for the two gases in the cylinder?
3(1 mark)MCQ
Which gas has a higher root mean square (rms) speed, and why?
4(2 marks)
Calculate the ratio of the mass density of argon to the mass density of nitrogen in the cylinder.
5(2 marks)
If the temperature of the mixture is raised to 600 K, what will be the new total pressure inside the cylinder?
Case Study7 marks
The Rising Bubble
An underwater researcher observes an air bubble with an initial volume of 1.0 cm³ being released from an instrument at the bottom of a freshwater lake, 40 meters deep. At this depth, the water temperature is a chilly 12°C. The bubble ascends towards the surface. As it rises, the surrounding water pressure decreases, and the temperature increases. At the surface, the water temperature is 35°C, and the pressure is the standard atmospheric pressure (1 atm, or approximately 1.01 x 10⁵ Pa).
The pressure at a depth 'h' in a liquid is given by the formula P_depth = P_surface + ρgh, where ρ for freshwater is 1000 kg/m³ and g ≈ 9.8 m/s². The researcher models the air in the bubble as an ideal gas to predict its behavior.
Questions on this case
1(1 mark)MCQ
What is the approximate absolute pressure at the 40 m depth?
2(1 mark)MCQ
The primary physical law that describes the state of the air throughout the bubble's ascent is the:
3(1 mark)MCQ
As the bubble rises from the bottom to the surface, the average kinetic energy of the air molecules inside it:
4(2 marks)
Calculate the final volume of the bubble when it reaches the surface. (Use P_depth ≈ 5 atm, P_surface = 1 atm).
5(2 marks)
Why would using only Boyle's Law (PV = constant) lead to an inaccurate result for the final volume?
Case Study7 marks
Enriching Uranium
In a gaseous diffusion plant, uranium is enriched for use in nuclear reactors. Natural uranium is converted into uranium hexafluoride (UF₆) gas, which is a mixture of two main isotopes: a large amount of ²³⁸UF₆ and a small amount of ²³⁵UF₆. The process relies on the slight difference in the average speeds of these two types of molecules.
The UF₆ gas is pumped through a chamber containing a porous barrier with microscopic holes. At a given temperature, the lighter ²³⁵UF₆ molecules move slightly faster than the heavier ²³⁸UF₆ molecules. As a result, they are slightly more likely to pass through the barrier in any given time interval. This process is repeated thousands of times in a 'cascade' to gradually increase the concentration of ²³⁵UF₆. The atomic mass of a fluorine atom (F) is 19.0 u.
Questions on this case
1(1 mark)MCQ
At a fixed temperature inside the chamber, how does the average translational kinetic energy of a ²³⁵UF₆ molecule compare to that of a ²³⁸UF₆ molecule?
2(1 mark)MCQ
What are the molecular masses of ²³⁵UF₆ and ²³⁸UF₆, respectively?
3(1 mark)MCQ
The rate of diffusion of a gas is proportional to its rms speed. The separation works because:
4(2 marks)
Calculate the ratio of the rms speed of a ²³⁵UF₆ molecule to that of a ²³⁸UF₆ molecule at any given temperature.
5(2 marks)
Based on your answer to the previous question, explain why the enrichment process must be repeated 'thousands of times'.