Alcohols, Phenols and EthersClass 12 Chemistry Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study7 marks
The Cumene Process for Phenol Production
Phenol, a crucial industrial chemical, is primarily manufactured worldwide using the cumene process. This method is highly efficient and economically viable. The process begins with the Friedel-Crafts alkylation of benzene with propene to produce cumene (isopropylbenzene). In the second step, cumene is oxidized in the presence of air to form cumene hydroperoxide. This intermediate is then treated with dilute acid, which causes it to cleave into phenol and a valuable co-product. This co-product is also a significant industrial solvent and a starting material for synthesizing other organic compounds, making the overall process very cost-effective. The worldwide production of phenol is almost entirely dependent on this clever two-step synthesis from readily available hydrocarbon feedstocks.
Questions on this case
1(1 mark)MCQ
What is the valuable co-product formed alongside phenol in the cumene process?
2(1 mark)MCQ
The first step of the process, formation of cumene, is an example of which type of reaction?
3(1 mark)MCQ
The conversion of cumene hydroperoxide to phenol is carried out by treating it with:
4(2 marks)
Draw the structure of the intermediate, cumene hydroperoxide.
5(2 marks)
Write the overall chemical equation for the final cleavage step where cumene hydroperoxide is converted into phenol and its co-product.
Case Study7 marks
Distinguishing Alcohols in the Lab
A chemistry student, Rohan, was given three unlabelled test tubes, each containing a different isomer of butanol: butan-1-ol, butan-2-ol, and 2-methylpropan-2-ol. To identify them, his teacher suggested the Lucas test. Rohan added a few drops of Lucas reagent (a solution of anhydrous zinc chloride in concentrated hydrochloric acid) to each test tube and shook them well at room temperature.
He observed the following:
- Test Tube A: Turbidity appeared almost immediately.
- Test Tube B: Turbidity appeared slowly, taking about 5-7 minutes.
- Test Tube C: No turbidity was observed even after 10 minutes.
The appearance of turbidity is due to the formation of the corresponding alkyl chloride, which is immiscible in the aqueous solution.
Questions on this case
1(1 mark)MCQ
Which test tube contained 2-methylpropan-2-ol?
2(1 mark)MCQ
The reaction of the alcohol in Test Tube A with Lucas reagent predominantly follows which mechanism?
3(1 mark)MCQ
The alcohol present in Test Tube C is:
4(2 marks)
What is the role of anhydrous zinc chloride (ZnCl2) in the Lucas reagent?
5(2 marks)
Write the chemical reaction for the compound in Test Tube B (butan-2-ol) with the Lucas reagent.
Case Study7 marks
A Chemist's Dilemma in Ether Synthesis
A research chemist aimed to synthesize tert-butyl ethyl ether. She considered two possible pathways based on the Williamson synthesis.
Route A: Reacting sodium ethoxide (CH3CH2ONa) with tert-butyl bromide ((CH3)3C-Br).
Route B: Reacting sodium tert-butoxide ((CH3)3CONa) with ethyl bromide (CH3CH2Br).
Upon performing the experiment for Route A, she was surprised to find that instead of the desired ether, the major product was a gaseous alkene, and very little ether was formed. However, Route B proceeded smoothly and gave a good yield of tert-butyl ethyl ether. This outcome highlights a critical limitation of the Williamson synthesis, where the choice of reactants is crucial for success, as alkoxides can act not only as nucleophiles but also as strong bases.
Questions on this case
1(1 mark)MCQ
What is the major product formed in the failed Route A?
2(1 mark)MCQ
The reaction in Route A fails to produce the ether because sodium ethoxide primarily acts as a:
3(1 mark)MCQ
The successful synthesis in Route B proceeds via which mechanism?
4(2 marks)
Explain in one or two sentences why elimination is favored over substitution in Route A.
5(2 marks)
Write the complete chemical equation for the successful synthesis of tert-butyl ethyl ether (Route B).