ElectrochemistryClass 12 Chemistry Case Study Questions
13 Questions
Generated by KedovoAI
Case 1 of 13
Case Study7 marks
The Versatile Daniell Cell
A student constructs a classic Daniell cell by placing a zinc rod in a 1 M zinc sulfate solution and a copper rod in a 1 M copper sulfate solution. The two half-cells are connected by a salt bridge, and a voltmeter connected to the electrodes reads a potential of 1.1 V. This setup demonstrates the conversion of chemical energy into electrical energy. The student then investigates the effect of an external opposing potential () applied to the cell. It is observed that as long as is less than 1.1 V, the conventional current flows from copper to zinc. When is exactly 1.1 V, the current stops. Interestingly, when is increased beyond 1.1 V, the direction of current flow reverses, and the cell now consumes electrical energy to drive a non-spontaneous reaction.
Questions on this case
1(1 mark)MCQ
What is the primary function of the Daniell cell when no external potential is applied?
2(1 mark)MCQ
When the external potential is greater than 1.1 V, the device functions as:
3(1 mark)MCQ
During the normal operation of the Daniell cell (i.e., when it acts as a galvanic cell), which statement is correct?
4(2 marks)
Write the half-cell reaction that occurs at the anode when the cell is functioning as a galvanic cell.
5(2 marks)
What happens to the concentration of ions in the zinc half-cell when V? Explain your reasoning.
Case Study7 marks
Sacrificial Protection of a Steel Pipeline
A new underground steel pipeline, primarily made of iron, is being installed to transport water. To protect it from rusting, which is an electrochemical process, engineers employ a method called cathodic protection. They attach large blocks of magnesium metal to the steel pipe at regular intervals. The moist soil acts as an electrolyte, creating a galvanic cell between the magnesium and the iron. Because magnesium is more reactive than iron, it preferentially corrodes, acting as a 'sacrificial anode'. This protects the steel pipeline, which is forced to act as the cathode. The standard reduction potentials are: and .
Questions on this case
1(1 mark)MCQ
In the electrochemical process of rusting, the site where iron gets oxidized acts as the:
2(1 mark)MCQ
In this protection system, the magnesium blocks act as the sacrificial anode because:
3(1 mark)MCQ
By attaching the magnesium blocks, the steel pipeline is forced to become the:
4(2 marks)
Write the half-reaction for the oxidation of the sacrificial metal in this setup.
5(2 marks)
Calculate the standard emf () of the galvanic cell formed between magnesium and iron.
Case Study7 marks
The Lead-Acid Car Battery
The lead-acid storage battery is a vital component in most conventional automobiles. It is a secondary battery, meaning it is rechargeable. It consists of a lead anode and a grid of lead packed with lead dioxide () as the cathode. Both electrodes are immersed in a 38% solution of sulfuric acid, which acts as the electrolyte. When the battery is in use (discharging), both electrodes are converted into lead(II) sulfate (), and the sulfuric acid is consumed, diluting the electrolyte. When the car's engine is running, the alternator reverses the current, recharging the battery. This reverses the electrode reactions, converting back to and and regenerating the sulfuric acid.
Questions on this case
1(1 mark)MCQ
What happens to the density of the sulfuric acid electrolyte as the battery discharges?
2(1 mark)MCQ
The lead-acid battery is classified as a 'secondary' battery because it:
3(1 mark)MCQ
During the charging of the battery, lead sulfate () at the anode is:
4(2 marks)
Write the half-reaction that occurs at the cathode during the discharging of the battery.
5(2 marks)
What is the overall cell reaction that occurs during the discharging of the battery?