Dual Nature Of Radiation And MatterClass 12 Physics Case Study Questions

12 Questions
Generated by KedovoAI
Case 1 of 12
Case Study7 marks

The Automatic Door Sensor

Modern automatic doors, like those at a supermarket, often use an active infrared (IR) motion sensor. The system consists of a source emitting a continuous beam of infrared light and a photodetector placed opposite to it. When the beam is uninterrupted, the IR light falls on the photodetector, which is made of a photosensitive material. This generates a small, steady photocurrent. This current is used to keep a circuit closed, which in turn keeps the door motor off. When a person walks through, they block the beam. The photocurrent drops to zero, and the control circuit detects this change, triggering the motor to open the door.
The photosensitive material in the detector has a specific work function, ϕ0\phi_0. For the detector to work, the energy of the incident IR photons must be greater than this work function. The intensity of the IR beam determines the magnitude of the saturation current.
Questions on this case
1
The fundamental principle behind the operation of the photodetector is the:
(1 mark)MCQ
2
If the intensity of the IR beam is increased, what will be the effect on the operation?
(1 mark)MCQ
3
If the IR source (wavelength λ=900\lambda = 900 nm) is replaced by a visible red light source (λ=700\lambda = 700 nm) of the same intensity, the photocurrent will likely:
(1 mark)MCQ
4
Define the term 'work function' in the context of the photosensitive material used in the detector.
(2 marks)
5
Suppose the infrared light used has a frequency of 3.5×10143.5 \times 10^{14} Hz and the work function of the material is 1.2 eV. Calculate the maximum kinetic energy of the emitted photoelectrons. (h=6.63×10−34h = 6.63 \times 10^{-34} J s, 1 eV=1.6×10−191 \text{ eV} = 1.6 \times 10^{-19} J)
(2 marks)