Electromagnetic InductionClass 12 Physics Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study7 marks
The Modern Kitchen Marvel
A modern induction cooktop is a marvel of efficiency. A special pot made of steel or iron is placed on a smooth, ceramic glass surface. When the cooktop is turned on, the pot heats up rapidly, cooking the food, while the glass surface itself remains almost cool to the touch. A curious physics student notices that a glass bowl or a copper-bottomed pan does not heat up on the same cooktop. The user manual mentions that the device works by generating a rapidly alternating magnetic field in a coil just beneath the ceramic surface. This field does not heat the glass but interacts directly with the cookware.
Questions on this case
1(1 mark)MCQ
What is the scientific name for the swirling currents induced in the base of the steel pot that cause it to heat up?
2(1 mark)MCQ
The heating of the pot is a direct result of which effect?
3(1 mark)MCQ
Why does a glass bowl remain cool on the cooktop?
4(2 marks)
Explain, based on Faraday's Law of Induction, why the cooktop must use an alternating magnetic field and not a static one.
5(2 marks)
The induced currents in the pot create their own magnetic field. According to Lenz's law, what is the relationship of this new magnetic field to the original magnetic field from the cooktop?
Case Study7 marks
Power from Falling Water
At a large hydroelectric power plant, water is stored in a reservoir behind a massive dam. To generate electricity, the water is directed through large pipes to turn the blades of a turbine. The turbine is connected by a shaft to a huge generator, which is essentially a large coil of wire (the armature) that rotates within a strong magnetic field. The armature is rotated at a constant frequency of 50 Hz. This process converts the potential energy of the stored water into electrical energy that can power millions of homes. The output of one such generator is rated at 100 MW.
Questions on this case
1(1 mark)MCQ
The fundamental principle behind the generator's operation is:
2(1 mark)MCQ
What is the primary energy conversion that takes place inside the generator itself?
3(1 mark)MCQ
If the number of turns in the generator's coil were doubled without changing anything else, the maximum induced EMF would:
4(2 marks)
The output current from the generator is alternating (AC). Explain why the current is 'alternating' based on the rotation of the coil.
5(2 marks)
Write the general equation for the instantaneous EMF () produced by the generator coil with N turns, area A, rotating at angular speed in a uniform magnetic field B. Assume at t=0, the plane of the coil is perpendicular to the field.
Case Study7 marks
The Wireless Charging Pad
A student places her new smartphone on a charging pad connected to the wall socket. A light on the phone turns on, indicating it is charging, despite no physical wire connecting the phone to the pad. Inside the pad is a 'transmitter' coil that generates a time-varying magnetic field. The phone itself contains a 'receiver' coil. For efficient charging, the manual suggests placing the phone centrally on the pad. The student notes that if the phone is moved too far to the side, or lifted slightly, the charging stops.
Questions on this case
1(1 mark)MCQ
The transfer of energy from the charging pad to the phone is governed by the principle of:
2(1 mark)MCQ
For this process to work, the current in the transmitter coil inside the pad must be:
3(1 mark)MCQ
Why does charging efficiency decrease when the phone is not centered on the pad?
4(2 marks)
Let be the current in the charging pad's coil and be the magnetic flux linked with the phone's coil. Write the mathematical relationship between and . Define the constant of proportionality.
5(2 marks)
Using Faraday's Law, derive the expression for the EMF () induced in the phone's coil in terms of the rate of change of current in the pad's coil ().