Electrostatic Potential And CapacitanceClass 12 Physics Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study7 marks
The Medical Defibrillator
In a hospital's emergency room, a patient suffers a cardiac arrest. A doctor calls for a defibrillator, a device designed to restore a normal heartbeat by sending a powerful electric shock to the heart. Internally, the device uses a high-voltage power supply to charge a large capacitor. For a typical defibrillator, a capacitor with a capacitance of is charged to a potential difference of .\n\nWhen the paddles are applied to the patient's chest, a button is pressed, and the capacitor rapidly discharges this stored energy through the patient's body in a pulse lasting only a few milliseconds. This massive, short burst of electrical energy can depolarize a large amount of the heart muscle, ending the chaotic rhythm and allowing the body's natural pacemaker to regain control. The entire process is a direct application of the principles of energy storage in capacitors.
Questions on this case
1(1 mark)MCQ
What is the primary function of the capacitor within the defibrillator circuit?
2(1 mark)MCQ
Calculate the amount of electrical energy stored in the defibrillator's capacitor when it is fully charged.
3(1 mark)MCQ
The energy is delivered in a very short time (a few milliseconds). This implies that the delivered shock has a very high:
4(2 marks)
Why is it necessary to charge the capacitor to a very high voltage like 2000 V?
5(2 marks)
How is the concept of 'potential energy' related to the function of the defibrillator?
Case Study7 marks
Shielding Signals with Coaxial Cables
Coaxial cables are essential for transmitting high-frequency signals, such as those for cable television and internet, with minimal interference. A typical coaxial cable has a layered structure: a central copper wire (the core conductor), surrounded by a plastic insulator (dielectric). Around this insulator is a woven mesh or foil made of copper or aluminum, known as the shield. This entire assembly is then covered by an outer plastic jacket.\n\nThe primary purpose of the metal shield is to protect the signal in the core conductor from external electrical noise and interference. The shield is usually connected to the ground, meaning its potential is held at zero volts. This configuration takes advantage of a fundamental property of conductors in electrostatics to create a region free from external electric fields, ensuring the integrity of the signal being transmitted.
Questions on this case
1(1 mark)MCQ
The principle that explains how the metal shield protects the inner conductor from external electric fields is known as:
2(1 mark)MCQ
According to the principles of electrostatics, what is the electric field inside the hollow conducting shield due to external static charges?
3(1 mark)MCQ
The passage states the shield is usually connected to the ground. This makes the shield a(n):
4(2 marks)
Briefly explain why a hollow conductor, like the cable's shield, is able to block external static electric fields.
5(2 marks)
If charges were placed inside the hollow shield, would the shield still prevent the electric field from these charges from reaching the outside? Explain.
Case Study7 marks
Enhancing Capacitors with Dielectrics
An electronics student is tasked with designing a compact, high-capacitance component for a filter circuit. They start with a standard parallel plate capacitor with area and plate separation . With air between the plates, its capacitance is measured to be .\n\nTo increase the capacitance without changing the physical dimensions (Area and separation ), the student decides to insert a dielectric material between the plates. They choose a slab of mica, which has a dielectric constant . The mica slab is cut to the exact dimensions to completely fill the space between the capacitor plates. This modification significantly alters the capacitor's properties, allowing it to store more charge at the same potential difference.
Questions on this case
1(1 mark)MCQ
After the mica slab is inserted, what is the new capacitance of the capacitor?
2(1 mark)MCQ
If the capacitor holds a fixed charge on its plates, how does the electric field between the plates change after the dielectric is inserted?
3(1 mark)MCQ
For a fixed charge , how does the potential difference between the plates change after the dielectric is inserted?
4(2 marks)
Explain at a molecular level how the dielectric material causes the electric field inside it to decrease.
5(2 marks)
Suppose the capacitor was connected to a 10V battery and then the mica slab was inserted. What would happen to the charge stored on the capacitor plates?