Metals and Non-metalsClass 10 Chemistry Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study5 marks
The Goldsmith's Deception
A man went door-to-door posing as a goldsmith, promising to restore the shine of old, dull gold ornaments. An unsuspecting lady gave him a set of gold bangles. He dipped them in a specific chemical solution. The bangles sparkled like new, but when the lady weighed them, she found their weight had been drastically reduced. The 'goldsmith' had used a highly corrosive, fuming liquid, which is one of the few reagents capable of dissolving noble metals like gold and platinum, even though the individual components of the solution cannot do so alone. This mixture is freshly prepared by mixing two common concentrated acids.
Questions on this case
1(1 mark)MCQ
The solution used by the fraudulent goldsmith is known as:
2(1 mark)MCQ
What are the two acids that are mixed to prepare this solution?
3(1 mark)MCQ
In what volume ratio are the concentrated hydrochloric acid and concentrated nitric acid mixed to create this solution?
4(1 mark)
Explain why the weight of the gold bangles was reduced after being dipped in the solution.
5(1 mark)
Based on their resistance to this powerful solution (except in this specific mixture), what property of metals like gold and platinum is highlighted?
Case Study7 marks
The Rusty Nail Experiment
A student wanted to investigate the conditions under which iron rusts. She took three clean iron nails and placed them in three separate test tubes labeled A, B, and C.
- In test tube A, she placed the nail and added some water, leaving it exposed to the air.
- In test tube B, she added boiled distilled water (to remove dissolved air), placed the nail, and then poured a 1 mL layer of oil on top before corking it.
- In test tube C, she placed the nail along with some anhydrous calcium chloride and corked it tightly. She left the setup for a few days and observed that the nail in test tube A had developed a brown, flaky coating, while the nails in test tubes B and C remained unchanged.
Questions on this case
1(1 mark)MCQ
What is the purpose of the oil layer in test tube B?
2(1 mark)MCQ
What is the role of anhydrous calcium chloride in test tube C?
3(1 mark)MCQ
The brown, flaky substance formed on the nail in test tube A is chemically known as:
4(2 marks)
Based on the results of the experiment, what two conditions are essential for the rusting of iron?
5(2 marks)
Galvanisation is a method to prevent rusting. What metal is used for the coating, and why does it still protect the iron even if the coating is scratched?
Case Study7 marks
Welding with Chemistry: The Thermit Reaction
To join cracked railway tracks or heavy machine parts, a special process is used which avoids the need for complex welding equipment on-site. This process involves a reaction between iron(III) oxide (Fe₂O₃) and a more reactive metal powder. When ignited, the reaction is so intensely exothermic that the iron produced is in a molten state, which then flows into the gap and solidifies, creating a strong weld. The other product is an oxide of the more reactive metal. This reaction is a classic example of a metal displacement reaction, where a highly reactive metal displaces a less reactive one from its oxide.
Questions on this case
1(1 mark)MCQ
The highly reactive metal powder used in the thermit reaction is typically:
2(1 mark)MCQ
The primary reason the iron produced is in a molten state is that the reaction is:
3(1 mark)MCQ
The thermit reaction is an application of which type of reaction?
4(2 marks)
Write the balanced chemical equation for the thermit reaction described in the passage.
5(2 marks)
In this reaction, identify the substance that is oxidised and the substance that is reduced. Justify your answer.