Indian Bronze SculptureClass 11 Fine Arts Case Study Questions

9 Questions
Generated by KedovoAI
Case 1 of 9
Case Study6 marks

The Lost-Wax Casting Technique

The lost-wax process is a technique used for making objects of metal, especially in Himachal Pradesh, Odisha, Bihar, Madhya Pradesh and West Bengal. The process involves several different steps. First a wax model of the image is made by hand of pure beeswax. These wax wires are then wound around to the shape of the entire image. The image is now covered with a thick coating of paste, made of equal parts of clay, sand and cow-dung. Into an opening on one side, a clay pot is fixed. In this molten metal is poured. The weight of the metal to be used is ten times that of wax. While the molten metal is poured in, the clay-plastered model is exposed to firing. As the wax inside melts, the metal flows down the channel and takes on the shape of the wax image. The image is later chiselled with files to smoothen it and give it a finish. Casting a bronze image is a painstaking task and demands a high degree of skill.
Questions on this case
1
What is the first step in creating a sculpture using the lost-wax process, as described in the passage?
(1 mark)MCQ
2
The paste used to cover the wax model is made of which three components?
(1 mark)MCQ
3
What happens to the original wax model during the firing process?
(1 mark)
4
What is the final step mentioned in the passage to complete the bronze image after casting?
(1 mark)
5
Explain why casting a bronze image using this method is described as a 'painstaking task' that 'demands a high degree of skill'.
(2 marks)