Temple Architecture and SculptureClass 11 Fine Arts Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study6 marks
The Basic Form of the Hindu Temple
The basic form of the Hindu temple comprises the following: (i) sanctum (garbhagriha literally 'womb-house'), which was a small cubicle with a single entrance and grew into a larger chamber in time. The garbhagriha is made to house the main icon which is itself the focus of much ritual attention; (ii) the entrance to the temple which may be a portico or colonnaded hall that incorporates space for a large number of worshippers and is known as a mandapa; (iii) freestanding temples tend to have a mountain-like spire, which can take the shape of a curving shikhar in North India and a pyramidal tower, called a vimana, in South India; (iv) the vahan, i.e., the mount or vehicle of the temple's main deity along with a standard pillar or dhvaj is placed axially before the sanctum. Two broad orders of temples in the country are known- Nagara in the north and Dravida in the south. At times, the Vesar style of temples as an independent style created through the selective mixing of the Nagara and Dravida orders is mentioned by some scholars.
Questions on this case
1(1 mark)MCQ
What is the literal meaning of 'garbhagriha'?
2(1 mark)
What is the primary function of the mandapa?
3(1 mark)
Identify the two main orders of temple architecture in India mentioned in the text.
4(1 mark)MCQ
The mountain-like spire of a North Indian temple is called a:
5(2 marks)
How does the passage describe the Vesar style of temples?
Case Study7 marks
The Nagara or North Indian Temple Style
The style of temple architecture that became popular in northern India is known as nagara. In North India it is common for an entire temple to be built on a stone platform with steps leading up to it. Further, unlike in South India it does not usually have elaborate boundary walls or gateways. While the earliest temples had just one tower, or shikhara, later temples had several. The garbhagriha is always located directly under the tallest tower. There are many subdivisions of nagara temples depending on the shape of the shikhara. The most common name for the simple shikhara which is square at the base and whose walls curve or slope inward to a point on top is called the 'latina' or the rekha-prasada type. The second major type is the phamsana, which tends to be broader and shorter, with roofs composed of several slabs that gently rise to a single point. The third main sub-type is the valabhi type, which are rectangular buildings with a roof that rises into a vaulted chamber, resembling ancient wagon-vaulted buildings.
Questions on this case
1(1 mark)MCQ
On what is a Nagara style temple commonly built?
2(1 mark)
What is the 'latina' or 'rekha-prasada'?
3(1 mark)MCQ
Which Nagara sub-type is rectangular with a vaulted chamber roof?
4(2 marks)
How do Nagara temples typically differ from South Indian temples regarding their boundaries?
5(2 marks)
Explain the architectural difference between a Phamsana and a Latina shikhara.
Case Study7 marks
The Dravida or South Indian Temple Style
Unlike the nagara temple, the dravida temple is enclosed within a compound wall. The front wall has an entrance gateway in its centre, which is known as a gopuram. The shape of the main temple tower known as vimana in Tamil Nadu is like a stepped pyramid that rises up geometrically rather than the curving shikhara of North India. In the South Indian temple, the word 'shikhara' is used only for the crowning element at the top of the temple which is usually shaped like a small stupika or an octagonal cupola—this is equivalent to the amlak and kalasha of North Indian temples. It is common to find a large water reservoir, or a temple tank, enclosed within the complex. At some of the most sacred temples, the main temple in which the garbhagriha is situated has one of the smallest towers. This is because it is usually the oldest part of the temple. With the passage of time, the population and size of the town would have increased, and it would have become necessary to make a new boundary wall around the temple, with even loftier gopurams.
Questions on this case
1(1 mark)MCQ
What is the entrance gateway of a Dravida temple called?
2(1 mark)
Describe the shape of the main temple tower, or vimana, in the Dravida style.
3(2 marks)
In the context of a Dravida temple, what does the term 'shikhara' refer to?
4(1 mark)MCQ
A key feature of a Dravida temple complex that is not the temple or gateway is a:
5(2 marks)
Explain why the main tower housing the garbhagriha might be one of the smallest in a large Dravida temple complex.