Systems Of Particles And Rotational MotionClass 11 Physics Case Study Questions
11 Questions
Generated by KedovoAI
Case 1 of 11
Case Study7 marks
The Figure Skater's Spin
An ice skater begins a spin with her arms extended horizontally, rotating at an angular speed of 15 revolutions per minute (rpm). By pulling her arms in close to her body, she changes her mass distribution relative to the axis of rotation. An observer notes that her angular speed increases dramatically to 60 rpm. Let the skater's initial moment of inertia with arms extended be and her final moment of inertia with arms folded be . For this analysis, we can assume the friction between the skates and the ice is negligible, meaning there are no significant external torques acting on the skater about her vertical axis of rotation. This phenomenon is a beautiful real-world demonstration of a fundamental principle of rotational dynamics. The skater has to exert an internal force to pull her arms inward against the rotational motion, which has implications for the system's energy.
Questions on this case
1(1 mark)MCQ
Which physical quantity remains conserved during the skater's entire maneuver?
2(1 mark)MCQ
What is the ratio of the skater's final moment of inertia to her initial moment of inertia ()?
3(1 mark)MCQ
What happens to the skater's rotational kinetic energy when she pulls her arms in?
4(2 marks)
State the principle of conservation of angular momentum. Why is it applicable in this scenario?
5(2 marks)
The skater's rotational kinetic energy increases. Where does this extra energy come from?
Case Study7 marks
The Mechanic's Wrench
A mechanic is trying to tighten a lug nut on a car wheel. The nut is rusty and requires a significant turning effect to rotate. The mechanic uses a wrench, which is a type of lever, to apply this turning effect. He places the wrench on the nut and applies a force at a distance from the center of the nut (the pivot point). He observes that applying the same force at a greater distance from the nut makes the job easier. He also notes that the direction of the force matters; pushing perpendicular to the wrench handle is most effective. This turning effect, known as torque, is a vector quantity defined by the cross product . For a force of 50 N, the mechanic uses a wrench of length 0.4 m.
Questions on this case
1(1 mark)MCQ
Torque is the rotational analogue of which quantity in linear motion?
2(1 mark)MCQ
Why is it easier for the mechanic to turn the nut when using a longer wrench, assuming the applied force is the same?
3(1 mark)MCQ
What is the maximum torque the mechanic can apply with his 50 N force and 0.4 m wrench?
4(2 marks)
Define the moment of a force (torque). If the mechanic applies the force at an angle of 30° to the wrench handle, what will be the magnitude of the torque?
5(2 marks)
Using the right-hand rule, describe the direction of the torque vector when the mechanic is tightening the nut (clockwise rotation as viewed from above).
Case Study7 marks
The Balancing See-Saw
Two children, Arjun weighing 30 kg and Priya weighing 25 kg, are playing on a see-saw. The see-saw is a uniform rigid rod of length 4 m, pivoted at its center (the fulcrum). To play, they must adjust their positions so that the see-saw is in mechanical equilibrium, meaning it is balanced horizontally without rotating. Arjun sits at a distance from the fulcrum, and Priya sits at a distance on the opposite side. The pivot at the fulcrum exerts an upward normal reaction force, , that supports the entire system. For the see-saw to be balanced, two conditions must be met: the net force must be zero (translational equilibrium), and the net torque about any point must be zero (rotational equilibrium).
Questions on this case
1(1 mark)MCQ
For the see-saw to be in rotational equilibrium, which condition must be met regarding the torques produced by the children?
2(1 mark)MCQ
If Arjun sits 1.5 m away from the fulcrum, where must Priya sit to balance the see-saw?
3(1 mark)MCQ
What is the magnitude of the upward reaction force R from the fulcrum when the see-saw is balanced?
4(2 marks)
State the two necessary conditions for a rigid body to be in mechanical equilibrium.
5(2 marks)
If the see-saw itself had a mass of 10 kg, how would this affect the calculation for the reaction force R? Would it affect the balancing positions of the children? Explain.