Thermal Properties Of MatterClass 11 Physics Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study7 marks
The Blacksmith's Craft
A blacksmith is tasked with fitting a new iron ring onto the rim of a large wooden cart wheel. The blacksmith measures the inner diameter of the iron ring and the outer diameter of the wooden rim. At the workshop temperature of , the rim's diameter is and the iron ring's inner diameter is . To fit the ring, the blacksmith knows not to force it, but to use a principle of thermal physics. He heats the iron ring uniformly until it just slips over the wooden rim. Once in place, he cools the ring, which then contracts and grips the wheel tightly. This age-old technique relies on the predictable expansion of metals when heated. The coefficient of linear expansion for iron is given as .
Questions on this case
1(1 mark)MCQ
What is the primary physical principle the blacksmith uses to fit the ring?
2(1 mark)MCQ
The increase in the dimensions of a body due to an increase in its temperature is called:
3(1 mark)MCQ
If the iron ring is heated, a compressive strain develops in it. The corresponding stress is called:
4(2 marks)
Calculate the minimum temperature to which the iron ring must be heated to fit onto the wooden rim.
5(2 marks)
After the ring is fitted and cools down, what kind of stress develops in the iron ring? Explain briefly.
Case Study7 marks
The Dewar Flask
A Dewar flask, commonly known as a thermos, is an insulating storage vessel that aims to keep its contents hotter or colder than the surroundings for as long as possible. A typical design consists of two flasks, one placed within the other and joined at the neck. The space between the two flasks is partially evacuated of air, creating a near-vacuum. The surfaces of both flasks facing the vacuum are often coated with a reflective layer, like silver. The flask is supported by an insulating material like cork or foam at the base and is sealed with a tight-fitting stopper, also made of insulating material. This clever design minimizes heat transfer by simultaneously tackling the three modes of heat transfer: conduction, convection, and radiation.
Questions on this case
1(1 mark)MCQ
What is the primary purpose of evacuating the space between the two walls of the flask?
2(1 mark)MCQ
The silvered surfaces are designed to minimize heat transfer by which mode?
3(1 mark)MCQ
Heat transfer through the stopper or cork is primarily via which mechanism?
4(2 marks)
Explain how a Dewar flask keeps a cold liquid, like iced tea, from warming up.
5(2 marks)
If the vacuum seal of the flask breaks and the space fills with air, will it be better at keeping things hot or cold compared to a normal glass bottle? Explain.
Case Study7 marks
The Coastal Breeze Phenomenon
People living near the coast often experience a pleasant, cool breeze blowing from the sea towards the land during the day, which is known as a sea breeze. After sunset, the direction of the wind reverses, and a land breeze blows from the land towards the sea. This daily cycle is a classic example of natural convection. It is driven by the differential heating of land and water by the sun. Water has a very high specific heat capacity (around ), much higher than that of soil or rock. This means that for the same amount of solar energy, the temperature of the land rises much more quickly and to a higher degree than the temperature of the sea.
Questions on this case
1(1 mark)MCQ
The primary property of water responsible for the sea breeze and land breeze phenomenon is its:
2(1 mark)MCQ
During the day, the air in contact with the warm ground gets heated, expands, and becomes less dense. What happens to this warm air?
3(1 mark)MCQ
The bulk movement of air in the sea breeze is an example of which mode of heat transfer?
4(2 marks)
Explain, using the concept of specific heat capacity, why the direction of the breeze reverses at night.
5(2 marks)
Why are temperature extremes (very hot days and very cold nights) more common in a desert than in a coastal city?