Current ElectricityClass 12 Physics Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study7 marks
The Car Battery Challenge
A car's electrical system relies on a lead-acid storage battery, which provides the electromotive force (emf) needed to operate the starter motor, lights, and ignition system. A typical battery has an emf of 12 V. However, it also possesses an internal resistance, which can be thought of as a small resistor in series with the emf source. In a particular car, the battery has an internal resistance of . This internal resistance is not constant; it is affected by temperature and the age of the battery. On a cold winter morning, a driver finds that their car struggles to start. A mechanic explains that the cold has increased the battery's internal resistance, limiting the current it can deliver.
The maximum current a battery can supply is when its terminals are short-circuited, though this is dangerous and can damage the battery. The voltage available to the external circuit (the terminal voltage) is always less than the emf when the battery is supplying current.
Questions on this case
1(1 mark)MCQ
What is the maximum current that can be drawn from the battery described in the passage?
2(1 mark)MCQ
If the battery is connected to a starter motor that has a resistance of , what is the terminal voltage of the battery?
3(1 mark)MCQ
The electromotive force (emf) of a cell is...
4(2 marks)
Why does the internal resistance of the battery increase on a cold day?
5(2 marks)
Explain the difference between the emf of a cell and its terminal voltage when it is supplying current to an external circuit.
Case Study7 marks
The Toaster's Heating Element
An electric toaster uses a heating element made of nichrome wire. Nichrome is an alloy of nickel, iron, and chromium. It is chosen for this application because it has a relatively high resistivity and its resistance does not change drastically with temperature, unlike pure metals. A student measures the resistance of a nichrome element at room temperature (C) and finds it to be . When the toaster is connected to a 230 V supply, the current is initially high but quickly settles to a steady value of 2.68 A as the element heats up to its operating temperature. The temperature coefficient of resistance of nichrome, averaged over the temperature range involved, is C. This property allows us to estimate the final temperature of the glowing red element.
Questions on this case
1(1 mark)MCQ
What is the resistance of the nichrome element at its steady operating temperature?
2(1 mark)MCQ
Why are materials like nichrome preferred over pure metals for heating elements?
3(1 mark)MCQ
What is the power dissipated by the heating element at its steady operating temperature?
4(2 marks)
Calculate the steady temperature of the nichrome element.
5(2 marks)
Explain why the current is initially higher and then settles to a steady, lower value.
Case Study7 marks
High-Voltage Power Transmission
Electrical energy is generated in power stations, often located far from cities and industrial areas where the energy is consumed. This energy must be transmitted over long distances through transmission cables. These cables, typically made of aluminum or copper, have a finite resistance, . When a current flows through them, a certain amount of power is lost as heat, given by . To make transmission efficient, this power loss must be minimized.
Consider a power station that needs to deliver a power to a town. This power is related to the transmission voltage and current by the equation . To reduce the power loss , utility companies transmit electricity at extremely high voltages, often hundreds of thousands of volts. At the receiving end, a device called a transformer is used to 'step down' the voltage to a safer level, such as 230 V for household use.
Questions on this case
1(1 mark)MCQ
The primary reason for transmitting electrical power at high voltages is to...
2(1 mark)MCQ
If the transmission voltage is doubled, while the power delivered remains the same, the power loss in the cables will be reduced by a factor of:
3(1 mark)MCQ
What is the name of the device used to change the voltage levels in AC transmission?
4(2 marks)
A power plant generates 100 MW of power to be transmitted over cables with a total resistance of . If the power is transmitted at 200 kV, calculate the power loss in the cables.
5(2 marks)
Starting from the equations and , show that the power wasted in the connecting wires is inversely proportional to the square of the transmission voltage.