Magnetism And MatterClass 12 Physics Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study7 marks
The Solenoid-Magnet Analogy
A physics student, Priya, is tasked with verifying Ampere's hypothesis. She takes a closely wound solenoid of 800 turns and a cross-sectional area of . She passes a current of through it. Using a magnetometer, she measures the magnetic field far away on its axis and finds it matches the field of a short bar magnet. She notes that the field lines, plotted using a small compass, also look identical to those of a bar magnet, forming closed loops.
Intrigued, she wonders what would happen if she cut the solenoid in half. Her teacher explains that this would be like cutting a bar magnet, resulting in two smaller solenoids, each with its own north and south pole. This reinforces the idea that magnetism originates from circulating currents.
Questions on this case
1(1 mark)MCQ
What is the primary basis for the analogy between a bar magnet and a current-carrying solenoid, as observed by Priya?
2(1 mark)MCQ
What is the magnitude of the magnetic moment associated with Priya's solenoid?
3(1 mark)MCQ
If the solenoid is cut in half, transverse to its length, what happens to each piece?
4(2 marks)
Explain in which sense the solenoid acts like a bar magnet. How can you determine its North and South poles?
5(2 marks)
Why do the magnetic field lines for both a bar magnet and a solenoid form continuous closed loops? What fundamental law of magnetism does this illustrate?
Case Study7 marks
Identifying Unknown Magnetic Materials
A materials engineer is given three rod-shaped samples: X, Y, and Z. They are visually identical. To identify them, she places each sample in a non-uniform magnetic field, which is strongest near the poles of a large electromagnet. She observes that Sample X is feebly repelled, moving towards the weaker field region. Sample Y is feebly attracted, moving towards the stronger field region. Sample Z is strongly attracted to the magnet, aligning itself quickly with the field.
She then measures the magnetic susceptibility () for each at room temperature. The results were: Sample X: , Sample Y: , and Sample Z: . She concludes the materials are distinct magnetic types.
Questions on this case
1(1 mark)MCQ
Based on its behavior and susceptibility, Sample X is classified as:
2(1 mark)MCQ
The behavior of Sample Y (feeble attraction, small positive ) is characteristic of which type of material?
3(1 mark)MCQ
How would the magnetic field lines be affected by the presence of Sample Z?
4(2 marks)
Explain the behavior of Sample X in the magnetic field at an atomic level. Why is it repelled?
5(2 marks)
If Sample Z is heated to a very high temperature (above its Curie temperature), how would its behavior in the magnetic field change and why?
Case Study7 marks
The Drone's Compass
A team is designing an underwater drone that uses the Earth's magnetic field for navigation. They model the drone's compass needle as a short bar magnet with a magnetic moment of . The local horizontal component of the Earth's magnetic field is uniform, with a magnitude of . The drone must be able to orient itself. When the compass needle is aligned with the Earth's field, it is in its most stable position. However, during a turn, the needle might be temporarily oriented at an angle to the field, experiencing a torque that realigns it. The designers need to calculate the torques and energies involved to ensure the compass functions correctly under various orientations.
Questions on this case
1(1 mark)MCQ
What is the magnitude of the torque on the compass needle when its axis makes an angle of with the direction of the magnetic field?
2(1 mark)MCQ
In which orientation does the compass needle have the maximum potential energy and is in unstable equilibrium?
3(1 mark)MCQ
The potential energy of the needle is defined to be zero when it is perpendicular to the field. What is its potential energy in the stable equilibrium position?
4(2 marks)
The passage states the needle is in its 'most stable position' when aligned with the field. Explain why this orientation is stable in terms of torque and potential energy.
5(2 marks)
Calculate the work required by an external agent to rotate the needle from its most stable position to its most unstable position.