Work, Energy, and Simple MachinesClass 9 Science Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study7 marks
The Airport Baggage Handler
At an airport, a baggage handler is tasked with moving luggage. He first pushes a 20 kg suitcase a distance of 10 m along a smooth, horizontal floor. To do this, he applies a constant horizontal force of 50 N. After pushing it, he needs to place it on a conveyor belt. He lifts the same suitcase vertically upwards by 1.5 m. For all calculations, assume the acceleration due to gravity, g, is 10 m/s².
The handler notices that pushing feels different from lifting. While pushing on the horizontal floor, the main resistance is friction (which is negligible here), but while lifting, he must work directly against the full weight of the suitcase. This scenario involves different applications of force and results in different types of work being done.
Questions on this case
1(1 mark)MCQ
What is the work done by the handler on the suitcase while pushing it 10 m horizontally?
2(1 mark)MCQ
During the horizontal push, what is the work done by the force of gravity on the suitcase?
3(1 mark)MCQ
When the handler lifts the suitcase vertically, the work done by him on the suitcase is:
4(2 marks)
Calculate the work done by the handler in lifting the 20 kg suitcase to a height of 1.5 m.
5(2 marks)
If the handler pushed another identical suitcase with a force of 50 N but it did not move, how much work did he do on the suitcase? Explain.
Case Study7 marks
The Roller Coaster Ride
A 500 kg roller coaster car starts from rest at the top of its first hill, Point A, which is at a height of 45 m above the ground. It then descends, reaching its maximum speed at the bottom, Point B, which is at ground level (h=0). After passing Point B, it climbs a second, smaller hill, reaching a peak at Point C, which is 25 m high. For the purpose of this analysis, we can ignore the effects of friction and air resistance, assuming mechanical energy is conserved throughout the ride. Use g = 10 m/s².
Questions on this case
1(1 mark)MCQ
What is the gravitational potential energy of the roller coaster car at Point A?
2(1 mark)MCQ
At which point (A, B, or C) is the car's kinetic energy at its maximum?
3(1 mark)MCQ
Assuming mechanical energy is conserved, what is the total mechanical energy of the car when it is at Point C?
4(2 marks)
Calculate the speed of the roller coaster car at Point B.
5(2 marks)
In a real roller coaster, the car would not be able to reach a subsequent hill of the same height (45 m). Explain why in terms of energy.
Case Study7 marks
The Runaway Truck Escape Ramp
A 15,000 kg truck is travelling down a steep highway at 90 km/h when its brakes fail. Fortunately, the driver spots an escape ramp ahead and steers the truck onto it. The ramp is a long, upward-sloping lane filled with soft gravel. The truck travels a distance of 80 m along the ramp and comes to a complete stop. In doing so, it gains a vertical height of 20 m. The gravel provides a significant resistive force that helps to stop the truck. We can analyze this event using the work-energy theorem. Use g = 10 m/s².
Questions on this case
1(1 mark)MCQ
First, convert the truck's initial speed to m/s. What is its initial kinetic energy?
2(1 mark)MCQ
What is the gain in the truck's gravitational potential energy when it comes to a stop?
3(1 mark)MCQ
The total work done by all forces (gravity, normal force, friction) on the truck is equal to the change in its:
4(2 marks)
Using the work-energy theorem, calculate the work done by the resistive force of the gravel.
5(2 marks)
What is the mechanical advantage of this escape ramp if it were used as a simple machine to lift the truck 20 m, ignoring friction?