Motion In A Straight LineClass 11 Physics Case Study Questions
10 Questions
Generated by KedovoAI
Case 1 of 10
Case Study7 marks
The Reaction Time Test
To measure a person's reaction time, a common physics experiment involves dropping a ruler. One person holds a ruler vertically, and another person places their thumb and forefinger at the 0 cm mark, ready to catch it. Without warning, the first person releases the ruler. The second person catches it as quickly as possible. The distance 'd' the ruler falls before being caught is a measure of their reaction time. In a particular trial, a student catches the ruler after it has dropped 21.0 cm.
This simple setup demonstrates the principles of motion under uniform acceleration, specifically free fall. The ruler's initial velocity is zero, and it accelerates downwards due to gravity. The time it takes to fall the distance 'd' is the reaction time, . This time includes the time for the person to see the ruler fall, process the information, and send a signal to their hand muscles to act.
Questions on this case
1(1 mark)MCQ
Which kinematic equation correctly relates the distance 'd', acceleration due to gravity 'g', and reaction time '' for the falling ruler, assuming initial velocity is zero?
2(2 marks)
Using the data from the passage ( cm) and taking , calculate the student's reaction time.
3(1 mark)MCQ
If the same experiment were conducted on the Moon, where the acceleration due to gravity is about 1/6th of that on Earth, how would the distance 'd' for the same reaction time change?
4(2 marks)
At the instant the ruler is released, what are its initial velocity and acceleration? (Assume downward direction is positive).
5(1 mark)MCQ
If the student was distracted and their reaction time doubled, the distance the ruler falls before being caught would:
Case Study7 marks
Investigating Vehicle Stopping Distance
Road safety engineers are deeply concerned with the stopping distance of vehicles. This distance is the total distance a car travels from the moment a driver perceives a hazard to the moment it comes to a complete stop. It consists of two parts: the distance traveled during the driver's reaction time and the distance traveled during braking.
For a particular car model, tests were conducted on a dry, straight road. It was found that when traveling at an initial velocity of , the driver could bring the car to a stop over a distance of 200 m after the brakes were applied. This braking phase involves a uniform deceleration. The driver's reaction time, the time before the brakes are applied, is assumed to be . The total stopping distance is a critical factor in setting speed limits, especially in areas like school zones.
Questions on this case
1(1 mark)
First, convert the initial velocity of to .
2(2 marks)
Calculate the magnitude of the car's uniform deceleration during the braking phase.
3(1 mark)MCQ
The braking distance () is proportional to the square of the initial velocity (). If the initial speed of the car were halved, the braking distance would become:
4(2 marks)MCQ
If the driver's reaction time is 0.5 s, the total stopping distance would be:
5(1 mark)MCQ
In the context of the passage, which statement is false?
Case Study7 marks
The Elevator Ride
An elevator in a tall skyscraper is designed to transport passengers efficiently. Consider a simplified journey from the ground floor (rest) to the top floor. The journey can be broken down into three distinct phases.
Phase 1: The elevator starts from rest and accelerates uniformly upwards for a short period.
Phase 2: It then travels at a constant maximum velocity for the majority of the journey.
Phase 3: Finally, as it approaches the top floor, it decelerates uniformly until it comes to a stop.
An engineering student places a weighing scale on the elevator floor and stands on it to observe how their apparent weight changes. The motion profile is carefully designed to ensure passenger comfort while minimizing travel time. The signs of velocity and acceleration are crucial for analyzing the forces experienced by the passenger.
Questions on this case
1(1 mark)MCQ
Taking the upward direction as positive, what are the signs of velocity and acceleration during Phase 1 (upward acceleration)?
2(1 mark)MCQ
During which phase of the journey would the reading on the weighing scale be equal to the student's actual weight?
3(2 marks)
What are the signs of velocity and acceleration during Phase 3 (upward deceleration)? Assume the upward direction is positive.
4(2 marks)
Sketch a simple, labelled velocity-time (v-t) graph representing the three phases of the elevator's upward journey.
5(1 mark)MCQ
The total vertical distance traveled by the elevator is represented on the v-t graph by the: